Search  pixel pixelNetForAll Developers
DSL SETUP
This section contains the pictures and comments about my experience with the DSL modem setup. The only change from the standard configuration was to do Port Forwarding on the DSL and forward port 8888 to the LAN IP of the computer and WebSiteRobot was up and running.
Bringing the DSL line inside. The Qwest guy brought the line outside but after trying several things, he could not hook it up with my existing line. Finally we connect a wire outside and he took off. I did not mind taking over from there
Wiring the DSL
Using the usual tools to finish up the wiring
Wiring the DSL
The ActionTech Gateway Modem from Qwest. You can see my old Hub in the back. I guess at some point I will still have to use it, since my DSL Gateway only has 4 Ports.
ActionTech M...
The HP is a dual boot Linux-Windows, while the NEC is my old Windows machine. My Dell Linux box is not on this picture.
My Computers
Configuring the DSL
DSL Configur...
Choosing the Advanced Configuration on the DSL web interface.
DSL Advanced...
The Port Forwarding option of the DSL Configuration. I think Port Forwarding isthe key to running services in your LAN with this kind of Modem Gateway
Port Forwarding
Here we choose to forward any connection on Port 8888 to the Computer that has LAN IP 192.168.1.3. That is really the main requirement for the Robot on a LAN. You may also have to make sure that Port 8888 is open on the Firewall for inbound connections.
Port Forwarding
After setting up Port Forwarding, you need to save the new configuration for it to into effect.
Saving Port ...
After setting up Port Forwarding, you need to save the new configuration for it to into effect.
Saving and R...
DSL SETUP